POXY PUTTY is a two part epoxy putty used for bonding, fixing, sealing and moulding as well as rebuilding of most materials. Used in machinery, auto parts, sport equipment, tools and accessories and any 1000's of other repairs possible.
APPLICATION:Gloves should be wom1. Surface to be prepared must be clean and free of oi, grease or wax.Smooth surfaces to be abraded.2. Remove the Steel Putty stick from the tube and cut or break the required amount needed. Mix thoroughly. by hand till unifomm colour is achieved.
Apply to required areas immediately. Apply slight pressure to ensure good bonding. The Steel Putty will become warm while it sets. Do not bend or move parts while curing takes place.
The Steel Putty sets at around 5 -10 minutes depending on temperature.Cure time is 30 minutes, Set and cure time in colder weather will be longer. Allow to fully cure before sanding or machining.
