EPOXY PUTTY is a two-part epoxy putty that may be used to rebuild most materials as well as bond, mend, seal, and mold them. utilized in sports equipment, motor parts, machinery, tools, accessories, and countless other repairs.
APPLICATION: Gloves should be worn on a clean, oil-, grease-, or wax-free surface.Abraded surfaces should be smooth.2. Cut or shatter as much Steel Putty as necessary after removing the stick from the tube. Mix well by hand until a uniform color is reached.
Apply right away to the necessary locations. Use mild pressure to guarantee a strong binding. As it sets, the steel putty will warm up. Avoid moving or bending pieces while they are curing.
Around 5 to 10 degrees is when the Steel Putty sets.
The Steel Putty sets at around 5 -10 minutes depending on temperature.Cure time is 30 minutes, Set and cure time in colder weather will be longer. Allow to fully cure before sanding or machining.
