Clean Interior & Exterior Surfaces with Tornado Air Action!
• Cleans and air dries in seconds
• Tested and approved by industry pros
• Low wear and maintenance
• Heavy-duty construction
• Low noise emissions
For optimal performance, the TORNADOR MARFLO Car Cleaning Tool works best with an air compressor that produces 5 CFM, or at least 85 psi
Use for: automotive leather, roof, velvet, rubber, plastics, glass, seat belt, various cracks, furniture and blankets.
TORNADOR MARFLO Car Cleaning Tools are the fastest and easiest way to clean all automotive surfaces. The TORNADOR MARFLO works with your air compressor to blast cleaning solution into crevices you can’t reach by hand. Clean carpet, plastics, and upholstery inside the car. Clean wheels, convertible tops, and body seams on the exterior. The TORNADOR MARFLO Car Cleaning Tool cleans where other tools can’t!
The TORNADOR MARFLO Car Cleaning Tool tackles your most challenging detailing jobs with ease. The cone-shaped nozzle and oscillating tip create a tornado cleaning action that cleans hard and soft surfaces like nothing you’ve seen before. Dirt and grime are immediately released from fabrics, carpet, and solid surfaces.
The TORNADOR MARFLO Car Cleaning Tool releases a fine mist of cleaning solution that does not over saturate surfaces. You’ll see the liquid turning dirty as grime is released from the surface. Wipe with a microfiber towel. Then turn the dial to shut off the water and use the compressed air to dry the cleaned area. It’s that simple.
Use the TORNADOR MARFLO Car Cleaning Tool on the dashboard, door panels, steering wheel, fabric upholstery, carpet, floor mats, and between seats. The TORNADOR MARFLO cleans in tough-to-reach places between seats and in seams. Because it releases so little liquid, surfaces dry quickly.
On the exterior, use the TORNADOR MARFLO Car Cleaning Tool to clean fabric convertible tops, body seams, wheels, and emblems. There’s no need to scrub. The TORNADOR MARFLO does the hard work for you.
The TORNADOR MARFLO Car Cleaning Tool must be used with an air compressor capable of producing a constant air pressure of at least 60 psi. Do not to exceed 110 psi in order to protect your TORNADOR MARFLO from unnecessary wear. Use the green valve to control the amount of liquid released by the TORNADOR MARFLO.
To clean any surface, dilute the desired cleaner according to label’s directions. Turn the liquid valve straight up and use an overlapping motion as you pass the TORNADOR MARFLO Car Cleaning Tool over the surface. If necessary, allow the cleaning liquid to dwell for 10-15 seconds. Use a microfiber towel to absorb excess liquid. Then turn the liquid valve off and use the compressed air to dry the cleaned area.
Cleaning with the TORNADOR MARFLO Car Cleaning Tool is easier and faster than small detailing brushes or swabs. Just spray and watch the dirt release from plastics, rubber, vinyl, and fabrics.
The TORNADOR MARFLO Car Cleaning Tool includes the gun itself with the 32 oz. jar and an extra cap for the jar.
The TORNADOR MARFLO Car Cleaning Tool is one of a kind. Clean and dry all hard-to-reach areas with the cyclonic cleaning power of the TORNADOR MARFLO!
